Garage door cables are an essential part of the garage door system. These cables help lift and lower the garage door smoothly and efficiently. However, over time, garage door cables can wear out or become damaged, leading to problems with the garage door’s operation. When this happens, it’s important to repair or replace the garage door cables to ensure that the garage door functions correctly and safely. In this guide, we’ll cover garage door cable repair and the steps involved.
Step 1: Disconnect the Garage Door Opener
The first step in repairing garage door cables is to disconnect the garage door opener. This is to prevent any accidental opening or closing of the door while you are working on it. To do this, locate the emergency release cord, usually found near the motor unit, and pull it to release the garage door from the opener.
Step 2: Secure the Garage Door
Next, you’ll need to secure the garage door to prevent it from falling. This is done by using locking pliers or C-clamps to secure the garage door to the track. This will hold the garage door in place while you work on the cables.
Step 3: Remove the Damaged Cable
To remove the damaged cable, start by removing the bottom bracket from the garage door. This will allow you to remove the damaged cable from the pulley. Next, disconnect the cable from the spring, which is usually located near the motor unit. This can be done using a pair of pliers to grip the cable and twist it to release it from the spring.
Step 4: Install the New Cable
Once you’ve removed the damaged cable, it’s time to install the new one. Start by threading the new cable through the bottom bracket and the pulley. Next, attach the cable to the spring using the pliers to twist it in place. Make sure the cable is properly tensioned to ensure that the garage door opens and closes smoothly.
Step 5: Reconnect the Garage Door Opener
After you’ve installed the new cable, it’s time to reconnect the garage door opener. This is done by pulling the emergency release cord to release the garage door from the track. Then, manually lift the garage door and re-engage the opener by pulling the cord once more.
In some cases, it may be necessary to replace both garage door cables to ensure that they are properly balanced. This is especially true if one of the cables is significantly more worn than the other. If you’re not comfortable repairing or replacing garage door cables yourself, it’s best to hire a professional to do the job. A garage door repair professional has the experience and tools needed to safely and efficiently repair or replace your garage door cables.
In conclusion, garage door cable repair is a necessary task to keep your garage door operating safely and efficiently. By following the steps outlined in this guide, you can repair or replace your garage door cables quickly and easily. However, if you’re not comfortable performing the repair yourself, it’s best to hire a professional garage door repair technician to do the job. A professional technician can ensure that your garage door is repaired correctly and safely, saving you time and money in the long run.